Vapo Glass

Vapo Glass - Vaporizer

It is made of nearly unbreakable glass and consists of a 5 cm diameter bowl and a 10 cm tube. All you need is a lighter and something to vaporize.

Usage

To use the Vapo 2, you need to unscrew the parts. Do not use too much force.

• Clean and dry the bowl.
• Put a small amount of your material into the bowl.
• Push the cap with the tube over the sphere.
• Heat the bowl by holding a lighter underneath it and slowly rotating the bowl back and forth.
• Inhale as soon as the bowl has filled with vapor
• Enjoy!

You can also use the Vapo 2 to make a water bottle pipe. To do this, take a plastic bottle or a can. Poke a hole about 1 cm above the waterline. Secure the stem in the hole so that it is submerged.

To clean the Vapo 2 bowl: fill it 1/3 full with a strong cleaning solution and let it soak for a while. Swirl the bowl around and rinse thoroughly. Use a scouring pad for stubborn spots.

To clean the tube, hold a lighter underneath it so the residue slowly evaporates. The resulting vapor is often the most flavorful. Once the residue has completely evaporated, the tube can be thoroughly cleaned by pushing a wad of steel wool through it.

The color may vary and is usually delivered in black.