Mycelium Grow Kit Instructions

By Derek

21 Sep 2016

Mycelium Grow Kit Instructions (1200cc and 2100cc)

Which magic mushroom grow kits can you use with this manual:

Contents:

Required:

Where should you place the grow kit?

In a warm spot with a stable temperature between 20–24 degrees Celsius.

A spot with natural light or fluorescent lighting, not in direct sunlight.

Preparation:

Always use the following supplies to ensure you can work in a sterile environment: disinfectant, gloves, a face mask, and clean clothing.
Loosen part of the lid by lifting it up.
Carefully fill the container with water until it is full to the brim.
Close the lid back onto the container and check that everything is properly sealed.
Now let the grow box sit in the room for 8 hours.
Reopen the grow kit at one corner and carefully let the water drain out.
Place the lid in the included zip-lock bag; you’ll need it again for the next flush.
Open the filter bag and place the grow kit at the bottom of the filter bag.
Fill a small cup with water and pour the water onto the bottom of the filter bag, not over the substrate.
Fold the top of the filter bag over a few times and secure it with paperclips.
Place the grow kit in a well-lit area with a stable temperature between 20–24 degrees Celsius.
Now it’s time to be patient. With the first flush, it can take up to 4 weeks before the first mushrooms start to grow.

Harvesting:

When the membranes under the mushroom caps are about to tear, it’s time to harvest!

Make sure to work hygienically and use the following supplies again: gloves, face mask, disinfectant, and clean clothing.
Open the filter bag and carefully remove the grow kit.
Remove the mushrooms with a twisting motion and do not touch the substrate.
If there are mushrooms on the sides, remove them with sterile tweezers.

After harvesting, you can start again at step 1 to set up the grow box again, up to 4 or 5 times!

Have fun and good luck growing your own mushrooms!